Air bubble washer

Model: Model Wash W Air 3 /5

Washer is intended for effective, high-performance washing of a wide range of fruits and vegetables, light lumpy and loose products, grains, legumes, and similar products. Washing machines have no mechanical parts. The product is cleaned by means of swirling streams of water generated by a pump. The bubble washer is equipped with two circuits for circulation of water and air distribution. The system for circulating water ensures that the product is moved forward through the washing bath. The system for generating and distributing air creates a uniform air bath across the entire length of the water bath. Dirt is removed by means of air bubbles settles on the bottom of the bath under the air jets, and so the air will not later raise them up again.

                       Model: Wash W Air3                                                            Model: Wash W Air5

˟ depends on the degree of pollution and the type of product

Model: DP Wash

The machine is equipped with an inverter for smooth adjustment of the rotational speed of brushes. There are two versions available: 7-brush designed for washing round vegetables: celery, beet, etc. and 9-brush recommended for washing parsley, carrots etc. In both models the brush's active length is the same. The panel is equipped with a special lock that prevents the above-mentioned protective covers from being opened automatically and removing the front cover and the cover of the transmission belt. The brush washer is equipped with four pieces of adjustable feet / legs that allow you to adjust the machine's height and alignment.

Drum washer

Model: Normit Drum Wash

Washer is an effective solution for washing potatoes, carrots, beets, and other root vegetables, including highly dirty ones with a large amount of soil, clay and other impurities stuck to them. The process of vegetable cleaning is carried out through friction between the product and the perforated walls of the drum, or between the vegetables themselves, and also through water rinsing. Can be equipped with a discharge conveyor. In production lines, i tis used after a machine for preliminary washing, soaking, and separation of stones ( when processing a higly dirty product).

˟ depends on the degree of pollution and the type of product

Model: Can washer

This product is designed for the cleaning and sterilization of glass, metal and plastic cans, glasses and similar containers, for companies involved in the canning, pharmaceutical and chemical industries. The washing and sterilization cans machine can be programmed to work in either an automatic or semi-automatic mode, for any capacity. Cans are loaded into the washer by the feed conveyor, inside which there is a mesh conveyor made of stainless steel. The conveyor speed is adjustable, so you can change the performance of the machine and the processing time at any stage.

Vessel Washer

Model: CEP

Is designed for cleaning various containers – for example z-blades mixer, which can be tilted. The washer also allows the use of steam. The device is equipped with spray nozzles for rinsing water.

Universal plant for washing

Models: UNI M, UNI M 1500

Is used to wash the potato, to clean seaweed from impurities or to inject substances into products. The machine consists of an operating tank filled with water, a system for mixing the product and moving it further and an unloading conveyor. Our specially designed mixer ensures that the product is mixed in an ideally uniform fashion and moved towards the unloading section. The product is washed out through hydrodynamic means, gently, without harming the product.

Grain washing, hulling and separating machine

Model: Ladia DR

Wetting and washing grain is a process done to prepare it for milling. When wetting is carried out, psysicbiological processes take place in the grain, and as a result, it becomes easier to separate the husk from the grain with minimal losses of the grain endosperm. During washing, the surface of the grain is cleaned, any heavy or ligh dirt and shrunk seeds are separated out, and microorganism are removed.

Model: CIP station

CIP stations are used for thorough cleaning, sanitation and disinfection of equipment. The compact station allows easy transport to the place of use. In the CIP station, heating, dosing, circulating sanitizing solutions and their final neutralization occur. The unit includes tanks for acidic and alkaline sanitizing solution, neutralizing tank, heating chamber and circulating pump.